Messerschmitt Me 262A-1a/U3, NAGr 6 (Matchbox, Parts from Frank-Airmodel, Vacu-formed)

TYPE: Reconnaissance fighter

ACCOMMODATION: Pilot only

POWER PLANT: Two Junkers Jumo 004B-2 turbojet engines, rated at 900 kp each

PERFORMANCE: 510 mph at 32,800 ft

COMMENT: Another development of the Messerschmitt Me 262A-1a series was the Messerschmitt Me 262A-1a/U3 reconnaissance fighter. Several aircraft featured a bay in the nose for two side-by-side obliquely-mounted cameras. These could be two Rb 50/30s or an Rb 20/30 and a Rb 75/30. A small observation window was introduced into the floor of the cockpit. Due to the size of the cameras two bulge at both sides of the nose were installed. Because of the high speed all cannon armament was discarded. These aircraft were deployed to tactical reconnaissance groups (NAG = Nahaufklärergruppe) (Ref.: 7).

Culver PQ-14B ‘Cadet’ (Frank-Airmodel, Resin)

TYPE: Radio-controlled target drone

ACCOMMODATION: Pilot only or radio controlled

POWER PLANT: Franklin O-300-11 air-cooled engine, rated at 150 hp

PERFORMANCE: 185 mph

COMMENT: In 1940, the U.S. Army Air Corps drew up a requirement for a radio-controlled target drone for training anti-aircraft artillery gunners. The first aircraft in a series of target drones was a modification of the Culver LFA ‘Cadet’ commercial sports plane which eventually led to the PQ-14 series used throughout WW II and beyond. In 1942 Culver designed a larger and more powerful derivative of their PQ-8 ‘Cadet’ target as the model NR-D. A single PQ-8 was converted to the new configuration and tested by the USAAF as the XPQ-14. This was followed by YPQ-14A service test aircraft and more than 1400 PQ-14A production models. Of the latter, about 1200 were transferred to the U.S. Navy, which designated them as TD2C-1 ‘Turkey’. The PQ-14A was powered by a Franklin O-300-11 piston engine and had a retractable tricycle landing gear. Like the PQ-8, it was flown manned for ferry or check-out flights and by radio-control from the ground as a target drone. The YPQ14B was a slightly heavier variant, which was followed by a production run of more than 1100 PQ-14B targets for the USAAF. A single PQ-14B was converted to use an O-300-9 engine and designated XPQ-14C (Ref.: 24).

Nakajima Ki-43-II-Otsu ‘Hayabusa’ (‘Peregrine Falcon’, ‘Oscar’) of Headquaters Chutai, 77th Hiko Sentai (Hasegawa)

TYPE: Fighter, fighter bomber

ACCOMMODATION: Pilot only

POWER PLANT: One Nakajima Ha.115 radial engine, rated at 1,130 hp

PERFORMANCE: 320 mph at 19,680 ft

COMMENT: The Nakajima Ki-43 ‘Hayabusa’was a single-engine land-based tactical fighter used by the Imperial Japanese Army Air Force in WW II. It was light and easy to fly and became legendary for its combat performance in East Asia in the early years of the war. It could outmaneuver any opponent, but did not have armor or self-sealing tanks, and its armament was poor until its final version, which was produced as late as 1945. Allied pilots often reported that the nimble Ki-43s were difficult targets but burned easily or broke apart with few hits. In spite of its drawbacks, the Ki-43 shot down more Allied aircraft than any other Japanese fighter and almost all the JAAF’s aces achieved most of their kills in it. Prototypes for the Nakajima Ki-43-II flew in February 1942. The Ha-25 engine was upgraded with the 2-stage supercharger, thus becoming the more powerful Nakajima Ha-115 engine, which was installed in a longer-chord cowling. The new engine turned a three-bladed propeller. The wing structure, which had suffered failures in the Ki-43-I, was strengthened and equipped with racks for drop tanks or bombs. The Ki-43-II was also fitted with 13 mm armor plate for the pilot’s head and back, and the aircraft’s fuel tanks were coated in rubber to form a crude self-sealing tank. Nakajima commenced production of the Ki-43-II at its Ota factory in November 1942. Production was also started at the Tachikawa Hikoki KK and the 1st Army Air Arsenal (Tachikawa Dai-Ichi Rikugun Kokusho), also at Tachikawa. Although Tachikawa Hikoki successfully managed to enter into large-scale production of the Ki-43, the 1st Army Air Arsenal was less successful – hampered by a shortage of skilled workers, it was ordered to stop production after 49 Ki-43s were built. Nakajima eventually ceased production in mid-1944 in favor of the Nakajima Ki-84 ‘Hayate’, but the Tachikawa Hikoki continued to produce the Ki-43. Total production amounted to 5,919 aircraft. Many of these were used during the last months of the war for kamikaze missions against the American fleet (Ref.: 24).

Messerschmitt Me 262 V9 (VI + AD) (Revell + parts from Unicraft)

TYPE: High speed experimental aircraft

ACCOMMODATION: Pilot only

POWER PLANT: Two Junkers Jumo 004B-2 turbojet engines, rated at 900 kp each

PERFORMANCE: 624 mph

COMMENT: The Messerschmitt Me 262 V9 was the 9th prototype and had nearly the same airframe as the Me 262A. It was completed in January 1944, it’s primary task being high speed trials up to the fighter’s Mach limitation. During the course of these various aerodynamic improvements were introduced. The leading edge of the inner wing as well as of the vertical tail was increased to 45 degree, the leading edge of the horizontal tail was swept back to 40 degree, a shallow, low-drag cockpit canopy was installed, and the muzzles were faired over. The highest speed attained by this experimental aircraft being 624 mph which was clocked at Leipheim on July 1944 (Ref.:  7).

Gloster ‘Meteor’ Mk. I (MPM)

TYPE: Interceptor fighter

ACCOMMODATION: Pilot only

POWER PLANT: Two Rolls Royce ‘Wellent’ 1 turbojet engines, rated at 771 kp each

PERFORMANCE: 410 mph at 30,000 ft

COMMENT: Early in 1940, Gloster Aircraft’s design team was entrusted with the design of a single-seat interceptor fighter to specification F9/40, the first specification ever prepared in Britain for an operational turbojet aircraft. Gloster had some experience in handling the turbojet engine as a new power unit for aircraft: The Gloster E.28/39 ‘Pioneer’ was the first jet-powered aircraft to fly in Britain.  Now, the result of the new design, the ‘Meteor’, was the first jet aircraft to enter squadron service with the RAF, and the only Allied jet aircraft to see operational service during World War II. A conventional twin-engine layout was adopted for the new fighter and on February 1941, and the Ministry of Aircraft production placed an order for twelve prototypes. In the event, only eight of the prototypes were completed, the first of these commencing taxiing trials on July 1942, powered by low thrust delivering non-flying Rover W.2B turbojets. Difficulties with the more powerful Power Jets W.2/500 resulted in the installation of RoverB.23 engines and the first flight of the ‘Meteor’ was made on July, 1943. A variety of other engines were tested in the prototypes until the first twenty ‘Meteor I’ were delivered to the RAF and on August 1944 one of these scored the first confirmed victory by a British jet fighter when a V-1 missile was destroyed by tipping it over with its wing and thus causing it to crash. And although in service at the ending stage of WW II the Gloster ‘Meteor” was never encountered in the air with the German Messerschmitt Me 262 ‘Schwalbe’ (Ref.: 12).

Messerschmitt Me 262A-1a ‘Schwalbe’ (Swallow) with Wfr. Gr. 21, III/JG 7

TYPE: Interceptor, fighter

ACCOMMODATION: Pilot only

POWER PLANT: Two Junkers Jumo 004B-1 turbojet engines, rated at 900 kp each

PERFORMANCE: 540 mph at 19,700 ft

COMMENT: The Messerschmitt Me 262, nicknamed ‘Schwalbe’ (‘Swallow’) was the world’s first operational turbojet engine powered fighter aircraft. Design work started in late 1938 when deliveries the first brand new BMW and Junkers turbojet engines were expected. Immediately, Messerschmitt began design studies on a fighter project under the designation Messerschmitt Me P.1065. The RLM ordered to build a mock-up and the evaluation expected promising results. Delayed production of turbojet engines led to the installation of a Junkers Jumo 210 G piston engine into the first aircraft, now officially designated Messerschmitt Me 262 V1. In spring 1940  first BMW P.3302 turbojets were available (prototypes of the later BMW 003 jet engines) and – installed additionally to the piston engine – the first flight was made on March 1942. Because the BMW engines were not operationally at all the Me 262 V-3 was equipped with two Junkers Jumo 004 turbojet engines and made the first pure jet flight in July 1942. All flight tests were promising and production order for the new fighter was placed. One of the most advanced aviation designs in operational use during World War II, the Me 262 was used in a variety of roles, including light bomber, fighter bomber, reconnaissance, and night fighter. The Me 262 was faster, and more heavily-armed than any Allied fighter, including the first British turbojet-powered fighter Gloster ‘Meteor’. But permanent engine problems and top-level interference kept the aircraft from operational status with the Luftwaffe until mid-1944. In total about 1,400 Me 262s were produced when the WW II ended. Primary production version was the Messerschmitt Me 262A-1a, usable as both fighter and fighter-bomber. The aircraft shown here belonged to the III./JG 7 (Third Group / Fighter Squadron 7) and has two Wfr.Gr. 21 (‘Werfer-Granate’, Rocket propelled shell) on bomb racks (Ref.: 20, 24).